Floor Sanding Rochester

Rochester Floor Finishing and Restoration

Rochester Floor Sanding (ME1): If your home in Rochester has got wooden floorboards there is always the chance that you could use this attractive natural material as your primary floor surface, instead of covering it up with man-made products like lino or carpet. This will probably increase the value of your property and will also lower the incidence of dust, mites and allergens, which will be especially beneficial if you happen to suffer from asthma or allergies. Getting your floorboards professionally sanded down is going to be the first step in this process.

Even though sanding floors isn't something that's impossible for you to accomplish on your own, you'll have to be able to get hold of the correct gear and have confidence in the use of it. If you feel you can, then by all means have a go, however you may be better to get in contact with a local Rochester floor sanding company, who will show up fully kitted out to complete the job correctly. If possible get recommendations from folks that you know who have had floor sanding done in the past.

Floor Sanding Rochester Kent (ME1)

Your initial concern will probably be that this process is going to create an awful lot of dust and mess, however that is actually not the case. Your floor sanding company will not be using little hand held orbital sanders such as those that you may have bought for sanding down a door or some paintwork. They'll arrive with some pretty hefty equipment which will include an extraction system which draws up all the generated dust as the sanding proceeds.

Manufacturers like: Pallmann, Bona, Hummer and Lagler produce professional floor sanding equipment, and many of these can obviously be rented from tool hire providers around Rochester, and elsewhere in Kent, should you require one. If you're using a professional floor sanding company for the venture, you will not need to be worried about that though. It is however worth bearing in mind if you do choose to do your own floors.

Floor Polishing Rochester (01634)

While you could perhaps move furniture from one side of the room to the other while conducting the sanding, it is far better if the room is cleared completely. This should include furniture and soft furnishings, together with any pre-existing floor coverings like carpets, underlay and grippers. Nails or screws that are sticking up from the floorboards will also need to be taken out or punched back in below the surface.

To get the sort of professional finish that you're looking for it will probably be necessary to do a bit more than simply sand down your floorboards and slap on a layer of varnish. There are bound to be a number of minor flaws for example screw holes, nail holes, cracks and splits, and there might even be some larger repairs required, where sections of floorboard are missing or damaged. These should all be refurbished to the highest possible level, caulked with wood filler and then given a final sanding down. Any wood filler used should match the colour of the floorboards, test an area before the final filling.

Floor Finishing Rochester UK

The next task is to give the newly sanded flooring a generous coat of sealant, Liberon or Ronseal is usually a decent choice. This should provide a perfect base on which to brush the finishing varnish coats, and gives some extra protection against a variety of issues which might affect your floor in the future. This will offer resistance to heat, alcohol and water, and also help in the prevention of staining, scratching and scuffing. Once dry, your floorboards can then be given a quick final sanding with smooth paper and finally 2 or 3 coats of finishing varnish.

When you're looking at the possibility of sanding down your wooden flooring, you might start to wonder whether it is actually worth all of the effort, dust and disruption. If you're having second thoughts about whether you wish to put yourself and your family through all this inconvenience, it may pay you to analyze the pros and cons of the floor sanding procedure. The cons have already been covered (effort, disruption and dust), so let's have a look at the positives, or in short - the benefits.

  • Restores the Look of a Worn Floor: With a previously exposed hardwood floor it is likely to show some signs of wear in time and the floor sanding and polishing process will bring it back to its former glory.
  • It's Easier to Keep a Polished Floor Clean: When a timber floor has been sanded, sealed and polished it will be much simpler to clean since all the splits and crevices will have been eliminated or filled and your freshly polished surface will no longer trap so much dust.
  • Reduce the Number of Pests and Bugs in Your Home: Although wooden flooring doesn't necessarily harbour as many pests and bugs as a carpet does, these pesky insects still like to hide themselves in any accessible cracks and crevices that they can find between the boards. A newly sanded and sealed floor will leave the pests with nowhere to hide.
Click For Floor Sanding Quotes in Rochester Kent

Floor sanding and restoration can be carried out in Rochester and also nearby in: Frindsbury, Halling, Grange, Blue Bell Hill, Walderslade, Higham, Wouldham, Luton, Burham, Upper Halling, Cuxton, Wainscott, Hempstead, Wigmore, Strood, Borstal, Gillingham, Brompton, as well as in these postcodes ME1 1SG, ME1 1QA, ME1 1LD, ME1 1SW, ME1 1AX, ME1 1HW, ME1 1QP, ME1 1HN, ME1 1BW, ME1 1SA. Locally based Rochester flooring specialists will probably have the telephone code 01634 and the postcode ME1.

Floor Sanding Machines Rochester

Floor Sanding Machines Rochester (01634)

The main bit of kit when tackling floor renovation on a wood floor in Rochester, is the floor sanding machine. It doesn't end there however, as so as to do the job properly, at least three different forms of floor sanding machine will be necessary. In the order that they will be employed, the equipment that will be required will be a belt sander, an edging machine and a buffing machine. To confuse the situation even further, there are also corner sanders, orbital sanders and staircase sanders.

Pallmann, Bona, Hummer and Lagler, are among the manufacturers that build the best floor sanding machines. These machines are expensive, therefore if you're intending to try resurfacing your own wood floors in Rochester, you will need to hire them out. Hire prices for floor sanding equipment is not excessive, however watch out for necessary add-ons like abrasives which can push the cost up significantly. When contemplating all of these points, you may come to the conclusion that using an established floor sanding service in Rochester is the best solution. (Tags: Floor Sanding Machinery Rochester, Floor Sanding Machine Hire Rochester, Floor Sanding Machines Rochester).

Floor Restoration Rochester

Wooden floors do not always have to be sanded down to bring them back to their former glory, and floors of course can be made from materials other than wood. In order to have your floors successfully restored, whether they are made out of tiles, granite, concrete or wood, it is best to seek the expertise and assistance of a professional Rochester floor restoration company, who will have the experience and knowledge of all of these different materials.

Before any real aesthetic floor restoration work commences, various procedures such as decontamination, disinfection and dehumidification, may be needed according to the condition of the flooring. A commonplace problem with floors stems from leaky washing machines and water pipes, the dampness from which can swiftly soak into imperfections and cracks in the surface of the floor. Bacteria, fungi and mould can develop when water remains in your flooring for any significant length of time. Expert floor restorers in Rochester know precisely how to deal with these problems without causing injury to the floor or the residents of the property. As with most things, prevention is better than cure, so to stop these sorts of things happening from the get go, keep a regular eye on water pipes and washing machines and keep your floors as clean as possible.

Floor Renovation Tasks Rochester

Floor Renovation Tasks Rochester (01634)

Rochester floor sanding experts can generally help you with floor maintenance, flooring repairs, residential flooring, gap filling, floor refinishing, wooden floors, school flooring, walnut floors, floor polishing, floor refurbishment, timber flooring, floor replacement, floor refurbishing, floor sanding in Rochester, flooring quotes, floor colouring, floor care, softwood floors in Rochester, floor staining, floor sealing, floor finishing Rochester, Granwood floors and other flooring services in Rochester, Kent.

Near Rochester

Also find: Halling floor sanding, Wigmore floor sanding, Higham floor sanding, Walderslade floor sanding, Cuxton floor sanding, Hempstead floor sanding, Gillingham floor sanding, Strood floor sanding, Upper Halling floor sanding, Borstal floor sanding, Brompton floor sanding, Wouldham floor sanding, Frindsbury floor sanding, Luton floor sanding, Wainscott floor sanding, Grange floor sanding, Blue Bell Hill floor sanding, Burham floor sanders and more.

Rochester Flooring Services

Find a Floor Specialist in Rochester Here
Rochester Floor Sanding Quotes (01634)
  • Rochester Floor Sanding
  • Rochester Floor Renovation
  • Rochester Dust Free Sanding
  • Rochester Floor Maintenance
  • Rochester Floor Refinishing
  • Rochester Floor Staining
  • Rochester Floor Varnishing
  • Rochester Floor Refurbishment
  • Rochester Floor Repairs
  • Rochester Floor Polishing
  • Rochester Flooring Repairs
  • Rochester Floor Sealing
  • Rochester Floor Replacement
  • Rochester Floorboard Sanding

Around Rochester

Some Rochester areas where floor sanding and restoration has been recently carried out - Berkeley Close, Brompton Lane, Carpenters Close, Bedgebury Close, St Margarets Street, Curlew Crescent, Chartwell Close, Beech Grove, St James Close, Albert Road, Armytage Close, Crispin Road, Coastguard Cottages, Stoke Road, Beaulieu Rise, Beresford Avenue, Brewer Road, Sholden Road, Ashenden Close, St James Road, Briar Dale, Telegraph Hill, Turner Street, Crest Road, The Willows, Avery Way, Bramley Rise, St Bartholomews Terrace, Dean Road, as well as these Rochester area postcodes: ME1 1SG, ME1 1QA, ME1 1LD, ME1 1SW, ME1 1AX, ME1 1HW, ME1 1QP, ME1 1HN, ME1 1BW, ME1 1SA.

Flooring Jobs Rochester: Find Rochester flooring jobs here: Rochester Flooring Jobs

Rochester Kent: If you want about Rochester, Kent look here and Rochester weather here

Floor Sanding ME1 area, and dialling code 01634.

TOP - Floor Sanding Rochester - Laminate Floors Rochester

01634 - Floor Finishing Rochester - Floor Sanding Rochester - Floor Maintenance Rochester - Floor Refurbishing Rochester - Floor Sealing Rochester - Floor Refurbishment Rochester - ME1 - Floor Polishing Rochester